Clarity RMS

• Register For Your FREE 90 Day Trial Here •

Give your internet device the same control as your pump station PLC touch screen.

 

Your system is equipped with a Wireless Modem that enables you to view and access your PLC’s Touchscreen via Clarity RMS.

TAKE ADVANTAGE OF OUR FREE 90-DAY TRIAL OFFER  •  COMPLETE THE REGISTRATION FORM BELOW

Remote Monitoring & Controls

Clarity RMS allows you to monitor, adjust, and control your system from any web enabled device. Fault Notifications will be sent to you immediately via SMS or Email. This will allow you to troubleshoot or diagnose your station off site and potentially save you the costly on-site visit. Register for your FREE 90-Day Trial today!

TRY IT OUT FREE FOR 90 DAYS. COMPLETE THE REGISTRATION FORM BELOW!

NOTE: Free trial offer valid within one year of PPS certified pump station start up only.

Save time and money by reducing on-site visits. Try it out FREE for 90 days!

Monitor, Adjust, and Control your station from any web enabled device.

Over 100 fault alarms that will notify you via SMS or Email.

Lower the risk of station downtime by making your system adjustments remotely.

PPS is available 24/7 for emergency diagnostics and trouble shooting.

NO THIRD PARTY SOFTWARE REQUIRED!

Clarity RMS FREE TRIAL Registration:

To register for your FREE 90 day trial, complete the form below. Once submitted, you will receive your Clarity RMS information within 24 hours. NOTE: Free trial offer valid within one year of PPS certified pump station start up only.

  • *Please note that any Data Plan Overages will be billed in addition to the customers monthly fees.

Data Plan Pricing:

 

8 MONTH PLAN ( APRIL—NOVEMBER): *250 MB PLAN $345 / *1 GB PLAN $425
1 YEAR PLAN (JANUARY—DECEMBER): *250 MB PLAN $480 / *1 GB PLAN $600*

Please note that any Data Overages will be billed to the customers monthly.

 

USA Pride in Craftsmanship

Innovative Smart Controls

Pre-Tested & Ready to Install

Built To Last A Lifetime

Super​NOVA Booster Pump System

The SuperNOVA booster pump series is a compact, all-in-one, pre-packaged variable speed pumping system that is engineered for light industrial & commercial applications. It features innovative and easy to use color touchscreen control with remote control and monitoring available as an additional option. These systems are UL listed, pre-tested and ready to install. And like all PPS pump systems, it includes unlimited, personalized technical support.

 

Industry Applications

System Type:

Variable speed, end suction centrifugal

Applications:

Pressure Boosting, Suction Lift, Flooded Suction

Site Applications:

Parks, Schools, Housing Developments, Sports Fields, Residential and Commercial

SuperNOVA Booster Pump Features
  • Compact, all-in-one, pre-packaged booster pump system
  • Engineered for long-term reliability
  • Innovative, easy to use touchscreen
  • Unlimited, personalized technical support
  • Remote control and monitoring available
  • Pressure tank
  • 24/7 Phone tech support
  • Easy to use Start Up Wizard
  • Optional heating and insulation
  • Optional automatic priming pump for suction lift applications
  • Available in custom colors
SuperNOVA Specifications

CONTROLLER FUNCTIONS:

Complete Automation

• Automatic start based on pressure drop or remote start relay.

• Maintains constant pressure at variable flows.

• Pump automatically enters sleep mode when demand stops and pressure setpoint is maintained.

System Protections

• Dry Run

• High Discharge Pressure

• High Flow, Low Flow

• Electrical Protections, including phase, voltage, current

Start-Up Assistant

• VFD programming for the motor

• System Sensor Activation & Calibration

• Operational Settings

• Discharge Pressure Setpoint

• Pump Sleep Settings

Troubleshooting Assistant

• System Alarms & Faults, Sensor Issues, & VFD/PLC Communication issues.

Password Protection

• For operator configurable settings

• Create New User, Operator, and Guest Accounts, with access limitations.

Features Fault, Trend & Operator Logs to Report System Functionality

INSTRUMENTATION:

Pressure Gauges

• Liquid filled stainless steel gauges.

Pressure Transmitter

• Stainless steel transmitter, transmits 4-20mA signal.

Flow Switch

• Compact stainless steel switch detects flow.

Flow Sensor (Optional)

• Non-magnetic, insertion flow sensor transmits flow rate to station controller.

CONTROLLER PRIMARY COMPONENTS:

Variable Frequency Drive (VFD)

• UL Listed, efficient VFD provides precise pressure control.

PLC/HMI

• CPU Module, with 3.5” Full color touchscreen, & Ethernet Port NEMA

3R Rated Disconnect Switch

• Padlockable disconnect switch with circuit-breaker protection.

Cell Modem (Optional)

• Allows for remote control and monitoring of pump station.

• Email and text message alarms.

MECHANICAL COMPONENTS:

Heavy Duty Pump & Motor

• Horizontal end-suction centrifugal pump, with mechanical seal, cast iron casing, and precision machined impellers.

• Premium efficient, open-drip proof motor.

Silent Check Valve

• Silent dual-disc check valve with grooved connection prevents reverse flow.

Butterfly Isolation Valves

• Grooved butterfly type with 10 position indicator to isolate the system for winterization/maintenance.

Air Relief Valve

• Continuously acting air relief valve releases entrained air.

Pressure Tank

• 2 gallon diaphragm type pressure tank stabilizes system pressure and prevents pump from short cycling.

Piping & Connections

• Powder coated steel piping provides superior corrosion resistance.

• Grooved connections and fittings for easy disassembly for winterization and maintenance.

• Optional HDPE Drop-pipe connection for quick tie-in piping network.

MARINE GRADE ALUMINUM ENCLOSURE:

• Protects the station from intruders and the elements.

• Low profile, compact design.

• Houses all components in an aesthetically pleasing enclosure.

• Custom colors available to suit the local environment.

• Lockable clamshell lid provides complete access to all system components.

• Thermosetting epoxy powder coating provides corrosion protection.

Performance & Power Options

Flow: 20 – 380 GPM

Pressure: 15 – 115 PSI

Horsepower: 3, 5, 7.5, 10, 20, 25 HP

Electrical input Options:

  • 208 Volt / 3 Phase / 60 Hz
  • 240 Volt / 1 Phase / 60 Hz
  • 240 Volt / 3 Phase / 60 Hz
  • 480 Volt / 3 Phase / 60 Hz
Download SuperNOVA Brochure

Click the PPS SuperNOVA Sales Sheet image below to review or download:

Download SuperNOVA Spec Sheet

Click the PPS SuperNOVA spec sheet image below to review or download: