Select The PPS Warranty You Would Like Review Below …

Ask About Our Extended Warranty Options Also Available

Precision Pumping Systems Standard Warranty

 

The equipment furnished as part of this agreement is subject to the original manufacturer’s warranty only. In addition, Precision Pumping Systems (PPS) provides the following LIMITED WARRANTY.

Telephone Technical Support: Free-of-charge for the life of your product.

Limited 1-Year Warranty: PPS warrants to the original buyer that its products and systems will be free from defects in material and workmanship for a period of twelve (12) months from the date of placing the Equipment in operation or fifteen (15) months from the date of completion of manufacture of the Equipment, whichever shall occur first.

When notified by Purchaser of a defect which conforms to this Warranty PPS shall, at its sole discretion, correct the defect by performing a suitable repair to the Equipment or by providing a replacement part. This warranty does not apply to equipment that has been damaged, misapplied or modified in any way.

Terms and Conditions:

1. Warranty claims must be submitted directly to Precision Pumping System within the valid warrantyperiod. No claims for warranty will be paid without prior approval by PPS.

2. The determination regarding defective status of components or products is at the sole discretion of PPS.

3. If a component or product is determined to be defective by Precision Pumping System, then PPS shall, at its sole discretion, correct the defect by performing a suitable repair to the equipment or by providing a placement part.

4. Proper start-up and operational procedures must be followed, and the required annual preventative maintenance must be performed by authorized PPS personnel or this warranty shall be void.

5. Within the first year after start-up, PPS will cover labor and materials costs. In any subsequent years of the warranty period (if an extended warranty is purchased) only materials costs are covered by this warranty–no labor costs will be paid.

Disclaimers: PPS shall not be liable for repairs, replacements or adjustments to the Equipment or costs of labor performed by the Purchaser without prior written consent of PPS.


 

Precision Pumping Systems Standard Warranty

 

The equipment furnished as part of this agreement is subject to the original manufacturer’s warranty only. In addition, Precision Pumping Systems (PPS) provides the following LIMITED WARRANTY.

Telephone Technical Support: Free-of-charge for the life of your product.

Limited 3-Year Warranty: PPS warrants to the original buyer that its products and systems will be free from defects in material and workmanship for a period of three (36) months from the date of placing the Equipment in operation or forty (40) months from the date of completion of manufacture of the Equipment, whichever shall occur first.

When notified by Purchaser of a defect which conforms to this Warranty PPS shall, at its sole discretion, correct the defect by performing a suitable repair to the Equipment or by providing a replacement part. This warranty does not apply to equipment that has been damaged, misapplied or modified in any way.

Terms and Conditions:

1. Warranty claims must be submitted directly to Precision Pumping System within the valid warranty period. No claims for warranty will be paid without prior approval by PPS.

2. The determination regarding defective status of components or products is at the sole discretion of PPS.

3. If a component or product is determined to be defective by Precision Pumping System, then PPS shall, at its sole discretion, correct the defect by performing a suitable repair to the equipment or by providing a placement part.

4. Proper start-up and operational procedures must be followed, and the required annual preventative maintenance must be performed by authorized PPS personnel or this warranty shall be void.

5. Within the first year after start-up, PPS will cover labor and materials costs. In any subsequent years of the warranty period (if an extended warranty is purchased) only materials costs are covered by this warranty–no labor costs will be paid.

Disclaimers: PPS shall not be liable for repairs, replacements or adjustments to the Equipment or costs of labor performed by the Purchaser without prior written consent of PPS.


 

Precision Pumping Systems Irrigation Industry Warranty

 

The equipment furnished as part of this agreement is subject to the original manufacturer’s warranty only. In addition, Precision Pumping Systems (PPS) provides the following LIMITED WARRANTY.

Telephone Technical Support: Free-of-charge for the life of your product.

Limited 3-Year Warranty: PPS warrants that its products and systems will be free from defects in material and workmanship for a period of three (3) years from the date of placing the equipment in operation or forty (40) months from the date of completion of manufacture of the equipment, whichever shall occur first. Initial start-up and preventative maintenance must be performed by an authorized PPS representative or the warranty shall be void. This warranty does not apply to equipment that has been damaged, misapplied or modified in any way.

Terms and Conditions:

1. Warranty claims must be submitted directly to Precision Pumping System within the valid warranty period. No claims for warranty will be paid without prior approval by PPS.

2. The determination regarding defective status of components or products is at the sole discretion of PPS.

3. If a component or product is determined to be defective by Precision Pumping System, then PPS shall, at its sole discretion, correct the defect by performing a suitable repair to the equipment or by providing a placement part.

4. Proper start-up and operational procedures must be followed, and the required annual preventative maintenance must be performed by authorized PPS personnel or this warranty shall be void.

5. Within the first year after start-up, PPS will cover labor and materials costs. In the second and third years of the warranty period only materials costs are covered by this warranty – no labor costs will be paid.

Disclaimers:

1. PPS shall not be liable for repairs, replacements or adjustments to the Equipment or costs of labor performed by the Purchaser without prior written consent of PPS.

2. All PPS warranty provisions require the Purchaser to operate and maintain the Equipment according to good industry practices and to comply with all recommendations by PPS regarding operation and maintenance.

3. PPS systems are equipped with safety features which protect key components from damage. Many of these safety features are overridden when operating the system in “Hand”. Operation of the system in “Hand”  voids this warranty unless directly authorized by a PPS technician.

4.There is no warranty coverage for mechanical pump seals or packing glands unless the failure occursduring the initial start-up of the system.

5.Any modifications to the pumping system without written approval by PPS shall void this warranty. Suchmodifications include, but are not limited to, changes to PLC/HMI programming, removing or disablingsensors, or adding or removing valves or piping.

6.  PPS makes no performance warranty unless specifically stated in its proposal.

7. The effects of corrosion, erosion and normal wear and tear are specifically excluded from the PPS warranty.

8. PPS provides no warranty for used or existing customer owned equipment of any character expressed or implied.

9. Blown fuses regardless of cause are excluded. Damages or problems created by or caused by lightning or power surges, low voltage, or other incoming power related problems are excluded from these warranties.

10. Damages created by or resulting from excessively dirty water, mud, silt, sand, grass, weeds, or any other organic or inorganic materials, clogged pump intake impellers or suction screens, and/or build-up of sediment in the sump are excluded.

11. Natural disasters, misuse, abuse, or misapplication, or other causes beyond PPS’ control, and acts of God are excluded from these warranties.

12. PPS will not accept any responsibility for the costs associated with systems installed in difficult to access areas including, but not limited to, those requiring cranes in excess of 5 tons, divers, helicopters,excavators, dredges, etc. Determination of difficult to access locations is at the sole discretion of PPS.

13. PPS MAKES NO OTHER WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE SPECIFICALLY EXCLUDED.

14. PPS will assume no liability for any incidental or consequential damages with respect to this contract or the Equipment and services furnished hereunder, in connection with the performance or breach thereof, or from the manufacture, sale, delivery, installation, repair or technical direction covered by or furnished under this contract. This is a commercial transaction.

15. It is also agreed that the owner’s or purchaser’s sole remedy, whether for breach of contract, warranty or in tort, shall be limited to the return of any goods and repayment of the contract price or the costs of repair and replacement of defective goods, at the option of PPS. No claim by the buyer of any kind shall be greater in amount than the net purchase price of the equipment.

Choice of law and arbitration:

Any claim or controversy arising under or relating to this warranty shall be submitted for arbitration and shall be governed by the laws of the state of Idaho.

USA Pride in Craftsmanship

Innovative Smart Controls

Pre-Tested & Ready to Install

Built To Last A Lifetime

The true measure of quality at PPS is customer satisfaction. This is the key to our success for years to come. Our quality management system provides a solid foundation to do the best job, the first time, every time.

USA Pride in Craftsmanship

Innovative Smart Controls

Pre-Tested & Ready to Install

Built To Last A Lifetime

The true measure of quality at PPS is customer satisfaction. This is the key to our success for years to come. Our quality management system provides a solid foundation to do the best job, the first time, every time.

Super​NOVA Booster Pump System

The SuperNOVA booster pump series is a compact, all-in-one, pre-packaged variable speed pumping system that is engineered for light industrial & commercial applications. It features innovative and easy to use color touchscreen control with remote control and monitoring available as an additional option. These systems are UL listed, pre-tested and ready to install. And like all PPS pump systems, it includes unlimited, personalized technical support.

 

Industry Applications

System Type:

Variable speed, end suction centrifugal

Applications:

Pressure Boosting, Suction Lift, Flooded Suction

Site Applications:

Parks, Schools, Housing Developments, Sports Fields, Residential and Commercial

SuperNOVA Booster Pump Features
  • Compact, all-in-one, pre-packaged booster pump system
  • Engineered for long-term reliability
  • Innovative, easy to use touchscreen
  • Unlimited, personalized technical support
  • Remote control and monitoring available
  • Pressure tank
  • 24/7 Phone tech support
  • Easy to use Start Up Wizard
  • Optional heating and insulation
  • Optional automatic priming pump for suction lift applications
  • Available in custom colors
SuperNOVA Specifications

CONTROLLER FUNCTIONS:

Complete Automation

• Automatic start based on pressure drop or remote start relay.

• Maintains constant pressure at variable flows.

• Pump automatically enters sleep mode when demand stops and pressure setpoint is maintained.

System Protections

• Dry Run

• High Discharge Pressure

• High Flow, Low Flow

• Electrical Protections, including phase, voltage, current

Start-Up Assistant

• VFD programming for the motor

• System Sensor Activation & Calibration

• Operational Settings

• Discharge Pressure Setpoint

• Pump Sleep Settings

Troubleshooting Assistant

• System Alarms & Faults, Sensor Issues, & VFD/PLC Communication issues.

Password Protection

• For operator configurable settings

• Create New User, Operator, and Guest Accounts, with access limitations.

Features Fault, Trend & Operator Logs to Report System Functionality

INSTRUMENTATION:

Pressure Gauges

• Liquid filled stainless steel gauges.

Pressure Transmitter

• Stainless steel transmitter, transmits 4-20mA signal.

Flow Switch

• Compact stainless steel switch detects flow.

Flow Sensor (Optional)

• Non-magnetic, insertion flow sensor transmits flow rate to station controller.

CONTROLLER PRIMARY COMPONENTS:

Variable Frequency Drive (VFD)

• UL Listed, efficient VFD provides precise pressure control.

PLC/HMI

• CPU Module, with 3.5” Full color touchscreen, & Ethernet Port NEMA

3R Rated Disconnect Switch

• Padlockable disconnect switch with circuit-breaker protection.

Cell Modem (Optional)

• Allows for remote control and monitoring of pump station.

• Email and text message alarms.

MECHANICAL COMPONENTS:

Heavy Duty Pump & Motor

• Horizontal end-suction centrifugal pump, with mechanical seal, cast iron casing, and precision machined impellers.

• Premium efficient, open-drip proof motor.

Silent Check Valve

• Silent dual-disc check valve with grooved connection prevents reverse flow.

Butterfly Isolation Valves

• Grooved butterfly type with 10 position indicator to isolate the system for winterization/maintenance.

Air Relief Valve

• Continuously acting air relief valve releases entrained air.

Pressure Tank

• 2 gallon diaphragm type pressure tank stabilizes system pressure and prevents pump from short cycling.

Piping & Connections

• Powder coated steel piping provides superior corrosion resistance.

• Grooved connections and fittings for easy disassembly for winterization and maintenance.

• Optional HDPE Drop-pipe connection for quick tie-in piping network.

MARINE GRADE ALUMINUM ENCLOSURE:

• Protects the station from intruders and the elements.

• Low profile, compact design.

• Houses all components in an aesthetically pleasing enclosure.

• Custom colors available to suit the local environment.

• Lockable clamshell lid provides complete access to all system components.

• Thermosetting epoxy powder coating provides corrosion protection.

Performance & Power Options

Flow: 20 – 380 GPM

Pressure: 15 – 115 PSI

Horsepower: 3, 5, 7.5, 10, 20, 25 HP

Electrical input Options:

  • 208 Volt / 3 Phase / 60 Hz
  • 240 Volt / 1 Phase / 60 Hz
  • 240 Volt / 3 Phase / 60 Hz
  • 480 Volt / 3 Phase / 60 Hz
Download SuperNOVA Brochure

Click the PPS SuperNOVA Sales Sheet image below to review or download:

Download SuperNOVA Spec Sheet

Click the PPS SuperNOVA spec sheet image below to review or download: