Certified Start Up Request

& Warranty Registration

Please complete and sign the form below to request a start up for your new pump station and register your PPS warranty. If you need assistance or have any questions, please contact our customer service at (208) 323-5300 for immediate attention

Certified Start Up Request & Warranty Registration

Project Name:
Warranty Registration:
***Attention: Warranty is Non-Transferable***
System Owner:*
First Last
Address:*
Street Address Address Line 2 City State ZIP Code
System Owner Contact Name:*
First Last
System Owner Email Address:*
Enter Email Confirm Email
System Owner Phone:*
Scope Of Work As Per Contract:
• Certified Start Up and Calibration to include one PPS Technician on site to perform Start-up and tune the station for correct operation and to conduct operator training.

• All customer representatives to be included in training need to be on site.
Certification That The System Is Ready For Start Up:
(Confirm each requirement below has been met by checking yes in all the boxes next to each one)
1) Has the installation of the system been finalized and system is available for start up?*
- Yes
- No
If you answered no to item #1, please explain why:
2) Has all construction for placement, operation and final inspections been completed?*
- Yes
- No
If you answered no to item #2, please explain why:
3) Has the mainline been thoroughly flushed? (If debris does get into the pump from the mainline, any damages to the pump are not covered under warranty.)*
- Yes
- No
If you answered no to item #3, please explain why:
4) Is water available and connected to ensure that the system can sustain and simulate normal usage for at least one hour while tech is on site?*
- Yes
- No
If you answered no to item #4, please explain why:
5) Is all pump station piping secured and in place with an approved means of connection and proper thrust blocking?*
- Yes
- No
If you answered no to item #5, please explain why:
6) Is the main power installed, connected to pump panel, and has passed electrical inspections and energized?*
- Yes
- No
If you answered no to item #6, please explain why:
7) Are all main lines complete and ready to be pressurized to specified PSI?*
- Yes
- No
If you answered no to item #7, please explain why:
8) If equipped, are connections to flush lines completed?*
- Yes
- No
If you answered no to item #8, please explain why:
9) If equipped, has all wireless equipment been installed?*
- Yes
- No
If you answered no to item #9, please explain why:
10) If your systems start-up request is in less than two weeks, have you received prior approval from PPS?*
- Yes
- No
If you answered no to item #10, please explain why:
A Two Week Notice Is Required To Schedule A Start-Up:
Date requested that is a minimum of 2 weeks out:*
Date Format: MM slash DD slash YYYY
Time Frame:*
On Site Contact Name:*
First Last
On-Site Contact Phone:*
Physical location, Coordinates or Address:*
City:*
State:*
Consent*
Any condition or circumstance that is not warranty related requiring PPS technician to extend on-site time or requires a return visit to site due to customer caused delays will accrue additional charges to customer based upon PPS service rates, including travel, lodging and incidentals. These charges will be due and payable upon receipt of invoice.14 day advance notice for date change. If airfare & hotel needs changed customer will be responsible for additional charges.
I agree to the non-warranty related policy above.
Name of authorized Signer:*
First Last
Authorized Signature:*
You can use your mouse (hold mouse button down) or touch screen pad to sign.
Date*
Date Format: MM slash DD slash YYYY
CAPTCHA

USA Pride in Craftsmanship

Innovative Smart Controls

Pre-Tested & Ready to Install

Built To Last A Lifetime

The true measure of quality at PPS is customer satisfaction. This is the key to our success for years to come. Our quality management system provides a solid foundation to do the best job, the first time, every time.

GoPPS.us

208.323.5300

USA Pride in Craftsmanship

Innovative Smart Controls

Pre-Tested & Ready to Install

Built To Last A Lifetime

GoPPS.us

208.323.5300

SuperNOVA Booster Pump System

The SuperNOVA booster pump series is a compact, all-in-one, pre-packaged variable speed pumping system that is engineered for light industrial & commercial applications. It features innovative and easy to use color touchscreen control with remote control and monitoring available as an additional option. These systems are UL listed, pre-tested and ready to install. And like all PPS pump systems, it includes unlimited, personalized technical support.

Industry Applications

System Type:

Variable speed, end suction centrifugal

Applications:

Pressure Boosting, Suction Lift, Flooded Suction

Site Applications:

Parks, Schools, Housing Developments, Sports Fields, Residential and Commercial

SuperNOVA Booster Pump Features

Compact, all-in-one, pre-packaged booster pump system
Engineered for long-term reliability
Innovative, easy to use touchscreen
Unlimited, personalized technical support
Remote control and monitoring available
Pressure tank
24/7 Phone tech support
Easy to use Start Up Wizard
Optional heating and insulation
Optional automatic priming pump for suction lift applications
Available in custom colors

SuperNOVA Specifications

CONTROLLER FUNCTIONS:

Complete Automation

• Automatic start based on pressure drop or remote start relay.

• Maintains constant pressure at variable flows.

• Pump automatically enters sleep mode when demand stops and pressure setpoint is maintained.

System Protections

• Dry Run

• High Discharge Pressure

• High Flow, Low Flow

• Electrical Protections, including phase, voltage, current

Start-Up Assistant

• VFD programming for the motor

• System Sensor Activation & Calibration

• Operational Settings

• Discharge Pressure Setpoint

• Pump Sleep Settings

Troubleshooting Assistant

• System Alarms & Faults, Sensor Issues, & VFD/PLC Communication issues.

Password Protection

• For operator configurable settings

• Create New User, Operator, and Guest Accounts, with access limitations.

Features Fault, Trend & Operator Logs to Report System Functionality

INSTRUMENTATION:

Pressure Gauges

• Liquid filled stainless steel gauges.

Pressure Transmitter

• Stainless steel transmitter, transmits 4-20mA signal.

Flow Switch

• Compact stainless steel switch detects flow.

Flow Sensor (Optional)

• Non-magnetic, insertion flow sensor transmits flow rate to station controller.

CONTROLLER PRIMARY COMPONENTS:

Variable Frequency Drive (VFD)

• UL Listed, efficient VFD provides precise pressure control.

PLC/HMI

• CPU Module, with 3.5” Full color touchscreen, & Ethernet Port NEMA

3R Rated Disconnect Switch

• Padlockable disconnect switch with circuit-breaker protection.

Cell Modem (Optional)

• Allows for remote control and monitoring of pump station.

• Email and text message alarms.

MECHANICAL COMPONENTS:

Heavy Duty Pump & Motor

• Horizontal end-suction centrifugal pump, with mechanical seal, cast iron casing, and precision machined impellers.

• Premium efficient, open-drip proof motor.

Silent Check Valve

• Silent dual-disc check valve with grooved connection prevents reverse flow.

Butterfly Isolation Valves

• Grooved butterfly type with 10 position indicator to isolate the system for winterization/maintenance.

Air Relief Valve

• Continuously acting air relief valve releases entrained air.

Pressure Tank

• 2 gallon diaphragm type pressure tank stabilizes system pressure and prevents pump from short cycling.

Piping & Connections

• Powder coated steel piping provides superior corrosion resistance.

• Grooved connections and fittings for easy disassembly for winterization and maintenance.

• Optional HDPE Drop-pipe connection for quick tie-in piping network.

MARINE GRADE ALUMINUM ENCLOSURE:

• Protects the station from intruders and the elements.

• Low profile, compact design.

• Houses all components in an aesthetically pleasing enclosure.

• Custom colors available to suit the local environment.

• Lockable clamshell lid provides complete access to all system components.

• Thermosetting epoxy powder coating provides corrosion protection.

Performance & Power Options

Flow: 20 – 380 GPM

Pressure: 15 – 115 PSI

Horsepower: 3, 5, 7.5, 10, 20, 25 HP

Electrical input Options:

208 Volt / 3 Phase / 60 Hz
240 Volt / 1 Phase / 60 Hz
240 Volt / 3 Phase / 60 Hz
480 Volt / 3 Phase / 60 Hz

Download SuperNOVA Brochure

Click the PPS SuperNOVA Sales Sheet image below to review or download:

Download SuperNOVA Spec Sheet

Click the PPS SuperNOVA spec sheet image below to review or download:

<img class="wp-image-752 aligncenter size-medium lazyload" src="https://www.gopps.us/wp-content/uploads/2020/01/PPS-logo-White-300x91.png" alt="" width="300" height="91" />

Certified Start Up Request

& Warranty Registration